The optimum speed for the workpiece can be seamlessly varied with the 550 watt motor. Idle speeds of 800 to 3,000 revolutions per minute can thus be finely adjusted. The scope of delivery includes an 80 millimetre face plate as well as a 4-prong centre tip, which can be screwed to the headstock as required. The tailstock can be easily clamped and unclamped using the quick-release lever, the spindle centre naturally runs with it.
With a centre height above bed of 125 millimetres, workpieces up to 25 centimetres in diameter and 60 centimetres long can be machined. The tool lies on the support surface, which can be smoothly adjusted. And once the work is done, the DM600VARIO from scheppach is also easily tidied up again.